
9D Series High current distribution terminal blocks for electrical panels
Three different applications are possible with the distribution blocks. Single pole connection for the distribution of power on multiple outputs. Multi-pole connection, by simply applying multiple distribution blocks. Grouping of multiple inputs to one output, for example in photovoltaic applications. The blocks are available for a maximum continuous current of 80, 125, 160, 250 or 400 A at 1000 VAC/1500 VDC and equipped with 7, 8 or 12 connections depending on the type. The Series 9D distribution blocks are easy to use. Multi-purpose mounting, 35 mm rail mounting or screw mounting using the molded mounting flanges. The connection specifications and quality marks are indicated on the terminal cover. The cover can be mounted in two directions for easy reading of the information. Pre-printed marking tags are included as standard.

Air handling Units for every project
De mogelijkheden zijn eindeloos. Ieder gebouw is anders. En daarmee ook de vragen omtrent het binnenklimaat. Daarom kijken we samen met de adviseur of installateur altijd naar de beste oplossing voor het specifieke project. Een LBK welke modulair is opgebouwd en volledig voldoet aan de wensen. Start met de VKT, kies de Basic als je zelf wilt calculeren, kies de VKT Plus als je geïntegreerde regeling zoekt en lees meer over de Ecostar als je ook wilt koelen.

Calibrations
We provide calibration services for a wide range of applications throughout the Netherlands. Click on the link below for more information about the scope and possible applications for your organization.

CamCarb XG
The new CamCarb XG is the best-in-class solution. Its conical shape enables high removal efficiency while maintaining low pressure drop. Its patented design maximizes adsorbent media utilization, resulting in an overall lighter weight filter. This unique combination provides a lower total cost of ownership (TCO). SAVES LABOUR AND DISPOSAL COSTS 50% of service labour and waste LOWERS ENERGY CONSUMPTION 35% for typical products vs existing solutions.

Circulair Renovation Air Handling Units
Already existing air handling units are easy to adapt for the future. Our Renovation & Maintenance department consists of enthusiastic and experienced employees who have years of knowledge about making old cabinets more sustainable, improving your cabinet in a circular way, saving energy and renovating or upgrading climate systems. At the Renovation & Maintenance department, the possibilities are almost endless. Most importantly, renovating your existing air handling unit saves material and costs. In this way you contribute to a circular economy: only the necessary parts are replaced and reused where possible. The installation costs remain limited, because the piping and ductwork do not have to be modified or only partially. All in all, a win-win situation: an environmentally friendly choice to immediately save up to 30% energy, extend lifespan and preserve what is good. All with relatively short payback times.

Circulair renoveren: verleng de levensduur van je bestaande luchtbehandelingskast
Reeds bestaande luchtbehandelingskasten zijn eenvoudig aan te passen voor de toekomst. Onze afdeling Renovatie & Onderhoud bestaat uit enthousiaste en ervaren medewerkers die over jarenlange kennis beschikken betreffende het verduurzamen van oude kasten, circulair verbeteren van je kast, energie besparen en het renoveren of upgraden van klimaatsystemen. Bij de afdeling Renovatie & Onderhoud, zijn de mogelijkheden bijna ontelbaar. Belangrijkste is echter dat het renoveren van je bestaande luchtbehandelingskast materiaal en kosten bespaart. Zo draag je bij aan een circulaire economie: alleen de noodzakelijke onderdelen worden vervangen en waar mogelijk weer hergebruikt. De installatiekosten blijven beperkt, doordat het leidingwerk en kanaalwerk niet of slechts deels aangepast moet worden. Al met al een win-win situatie: een milieu vriendelijke keuze om direct tot 30% energie te besparen, levensduur te verlengen en te behouden wat goed is. Alles met relatief korte terugverdientijden.

Condair NanoFog
Condair NanoFog humidification Application: Office, museum, odor-sensitive applications, low production areas. The NanoFog Evolution and the NanoFog Sens are exactly the right system for all application areas where it comes to microfine misting, low noise levels and attractive design. The dimensions of the NanoFog injectors have been reduced to a minimum in order to enable integration into the room that is as discreet and unobtrusive as possible. Small rooms, low ceilings, low humidity requirements or sensitive production or working environments - the NanoFog Evolution and the NanoFog Sens provide virtually invisible optimum humidity in the room.

Condair RS
DRAABE TurboFogNeo 8 Humidifier Application: For ceiling mounting in production and factory halls. The powerful DRAABE TurboFogNeo 8 air humidification system has been specially developed for high production and storage areas. The high capacity of max. 32 kg of water per device per hour makes the system economical to purchase and cost-effective to use. A high pressure pulse system provides the required operating pressure of 85 bar. The humidifiers are mounted on the ceiling and connected to the high-pressure station by means of flexible high-pressure hoses.

Condensate dehumidifiers and dryers Condair DC
Condensing dehumidifiers and dryers are ideal for reducing humidity around 50% RH and at temperatures of 15°C. The Condair DC Series dehumidifies from 75-930 litres per day with a ventilation capacity of 8,000 to 8,500 m³/h. This makes the dehumidifiers and dryers perfect for drying entire buildings. The system can add the dry air directly to the room or can be connected to existing or new air ducts. All models are equipped with hot gas frost protection as standard. Condair DC dehumidifiers can operate independently or be configured for mobile use within a building. The standard robust, galvanised housing offers maximum protection against harsh environmental conditions. A stainless steel version is available as an option. The dehumidifier is controlled via its internal controller with digital display, an optional remote controller or via BMS (Modbus). Condair DC condensing dehumidifiers and dryers use energy-efficient EC fans with three ventilation stages.

Crystal Beam Module: Phase Change Material
De CBM: PCM inductie-unit is ideaal voor het eenvoudig verduurzamen van bestaande klimaat installaties. De Crystal Beam Module (CBM) is een eenvoudige "Phase Change Materials" uitbreiding op uw bestaande klimaatinstallatie. Het enige wat een installatie nodig heeft om zijn werk te kunnen doen is een verse luchtaansluiting. Wanneer kunt u een CBM toepassen? Wilt u eenvoudig energie besparen, het binnenklimaat en met name de koeling, maar ook de verwarming aanzienlijk verbeteren? Dan is PCM inductie een praktische oplossing.

Discover the Thermia Sigrin at InstallTech & Bouw 2027! The powerful ground source heat pump with inverter technology for smart construction and installation projects. Efficient, comfortable, and future-proof. See you on April 14 or 15 in Hardenberg!
Thermia Sigrin: SCOP 5.48 | TWS hot water | Ultra-quiet | 3-19 kW modulating | Cooling & heating | Wifi, 4G & app.

DRAABE TurboFogNeo
Application: For wall mounting in production and factory halls The DRAABE TurboFogNeo air humidification system is designed for individual application in different spatial conditions. In high halls, small spaces or in environments with hidden corners. The different device and power variants can be combined with each other as desired. The flexible combination options of the different variants ensure optimum results with humidification and efficiency.

DRAABE TurboFogNeo 8
DRAABE TurboFogNeo 8 Humidifier Application: For ceiling mounting in production and factory halls. The powerful DRAABE TurboFogNeo 8 air humidification system has been specially developed for high production and storage areas. The high capacity of max. 32 kg of water per device per hour makes the system economical to purchase and cost-effective to use. A high pressure pulse system provides the required operating pressure of 85 bar. The humidifiers are mounted on the ceiling and connected to the high-pressure station by means of flexible high-pressure hoses.

Energy measurements
For grid operators, metering companies, and other professional parties, we provide the inspection and calibration of various energy meters. Whether it concerns the measurement of electricity, gas, or heat, we ensure that your metering equipment functions reliably and accurately.

FINDER OPTA 8A SERIES PROGRAMMABLE LOGIC RELAYS. Programmable with the open source Arduino IDE language and other languages such as LADDER. Finder's industrial experience and Arduino's technological innovation makes the product unique in the market.
FINDER OPTA SERIES 8A WHAT IS FINDER OPTA? FINDER OPTA is the name of a completely new series of PROGRAMMABLE LOGIC RELAY, ideal for creating simple intelligent logic for automation. Finder's industrial experience combined with Arduino's technological innovation has resulted in a product that is truly unique in the market. THE ADVANTAGES OF FINDER OPTA SIMPLE Designed to simplify the integration of electrical devices with the physical world and give you a world of possibilities for your projects. OPEN SOURCE Programming is possible with OPEN SOURCE, LICENSE-FREE software (IDE ARDUINO) and with traditional languages such as Ladder and FBD. POWERFUL The powerful dual-core Cortex® M7+M4 chip enables a wide range of computing operations in real time. SAFE Safe, thanks to the integrated high-end crypto chip that enables security during data transfer from hardware to the cloud. SOFTWARE OPTA is a powerful, safe and easy to program product. The collaboration with Arduino Pro allows you to integrate the open source platform Arduino Pro and the programming simplicity of Arduino sketches and libraries, as well as an optional set of traditional languages such as Ladder and FBD, which comply with the IEC 61131-3 standard for PLC programming. AVAILABLE VERSIONS The OPTA is available in three versions: LITE, PLUS and ADVANCED The LITE version is the basic version with the following specifications: - Power supply 12…24 V DC - 8 digital/analog (0-10V) inputs - 4 NO contact relay outputs, 10 A - USB (Type C) High Speed port for: • Programming • Data logging (via memory stick) - RJ45 Ethernet or Modbus TCP/IP connection The PLUS version also has an RS485 port for MODBUS RTU connection. The ADVANCED version is the most extensive version with RS485 port and integrated WIFI/BLE module.
28 results found